top of page

Tx Series Regulator for Corrosive Gases

Updated: Dec 30, 2023

Is designed for use in applications requiring constant outlet pressure even with wide variations in inlet pressure. This two-stage regulator is comparable to two single-stage regulators connected in series. The first stage is factory set to reduce the inlet pressure to 500 psig (34.4 bar). The second stage can be adjusted with the handle to achieve the required outlet pressure. This two-stage arrangement minimizes the supply-pressure effect caused by fluctuating inlet pressure, such as with a depleting gas cylinder. As inlet pressure drops below the setting of the first stage, the regulator then functions as a single- stage regulator. The first-stage pressure setting can be reduced while monitoring the pressure at the inter stage port, but lower flow may result.


Series : Tx Series Regulator

•Body Material : SS 316L/ Hastalloy/ Monel

•Cap Assembly : Standard

•Cleaning Process : Standard Cleaning Process

•Connection 1 Size & Type As per gas standard

•Connection 2 Size & Type 1/4 in. NPTF

•Handle : Knob

•Max Temp : 70 Degree

•Inlet pressure : Upto 210 bar

•Outlet pressure : Upto 14 Bar

•Flow rate : 250 LPM/800 LPM

•Sensing element : Diaphragm C276

•Seat Material : PTFE

•Mounting : Back/Panel


Maha Automations is a well-known manufacturer supplier exporter of Tx Series Regulator for Corrosive Gases in Mangalore, India.


For the Purchase of Tx Series Regulator for Corrosive Gases   kindly contact Maha Automations - info@mahaautomation.com







Recent Posts

See All
bottom of page