LUBRICANTS 

BALL VALVE.jpg

TURBINE OILS

Turbinol grades are premium quality turbine oils made from the best paraffinic base stocks having excellent oxidation and chemical stability. These properties are further enhanced with the incorporation of carefully selected antioxidants, rust inhibitors, and anti-foam agents. A balanced additive package also imparts excellent demulsibility and quick release of entrained air making it a long service oil.

ANGLE SEAT VALVE.png

BEARING OILS

Hp film oil grades are highly refined mineral oils exclusively developed for application in oil film bearings of steel plants. These oils are blended from solvent extracted, high viscosity index base stocks having excellent demulsibility characteristics. They also possess good oxidation and thermal stability.

BUTTERFLY VALVE.jpg

HYDRAULIC & CIRCULATING OILS

ENKLO oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear, and antifoam additives. They meet the requirements of very high-pressure systems and also of systems where high pump speeds are encountered.

CHECK VALVE.png

COMPRESSOR OILS

HYCOM C grades are formulated with selected base stocks and a special compounding agent to give excellent resistance to the washing effect of water. these are further fortified with anti-rust and anti-corrosion agent and have good fluidity at low temperatures. HYCOM C grades are recommended for cylinder lubrication of single and multistage air compressors with moist air and provide excellent lubrication of piston rings, valves, cylinder liners etc.

MACINE TOOL WAYOILS

WAYLUBE grades have been formulated to impart special frictional characteristics that overcome the stick-slip motion, ordinarily associated with slow-moving machine parts. they are also fortified with mild EP and rust preventive properties.

GLOBE VALVE.jpg

INDUSTRIAL GEARBOX OILS

These oils are recommended for all heavy duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions, pain and antifriction bearing subjected to shock and heavy loads, PARTHAN EP grades give dependable performance for continuous service at operating temperature up 110 c. PARTHAN EP oils are also suitable for spray lubrication systems requiring extreme pressure properties.

PINCH VALVE.png

SPINDLE OILS

These oils are recommended for lubrication of textile and machine tools, spindle bearings, timing gears, centrifugal separators, positive displacement blowers, and hydraulic systems of certain high precision machine tools.

SAFETY VALVE.jpg

TEXTILE OILS

YANTROL TS grades are specially designed for lubrication of textile machinery, have in addition excellent scour ability and superior tackiness characteristics. These therefore, reduce the possibility of staining the cloth in different stages of cloth manufacturing in textile mills. These oils minimize wear, provide protection against rust and corrosion.

SIGHT GLASSES.jpg

STEAM CYLINDER OILS

CYNDOL grades are formulated from specially treated high viscosity index, heavy, viscosity base stocks having enhanced lubricating properties and thermal stability. they have excellent oiliness and film strength characteristics, maximum resistance to the washing effect of moisture and excellent load-carrying ability. CYNDOL TC grades are compounded with special fatty oils and contain an adhesive agent.

EXPANSION JOINT.jpg

REFRIGERATION COMPRESSOR OILS

SEETUL GRADES are formulated from specially selected lube base stocks to provide low pour point, low floc point, dryness, good chemical stability and ready solubility in liquefied refrigerants, seetul n grades have additional characteristics of low freon floc point, (-) 40 c . they possess high fluidity at very low temperatures, resist deposit formation and have reduced tendency to foam.

ACTUATOR.webp

PNEUMATIC TOOL OILS

NU-MATIC oils are specially formulated with extreme pressure, tackiness, anti-rust agents to give load bearing characteristics, good adhesive characteristics, good demulsibility property and effective protection to metal surfaces against acidic corrosion. these grades have excellent flow characteristics to ensure proper feed and dispersion through the oilers.

LIMIT SWITCHES.jpg

LITHIUM SOAP GREASES

These are lithium soap multipurpose greases having excellent water resistance properties, high oxidation stability, maximum structural stability with superior anti-rust and anticorrosion properties. They meet the requirements of all industrial grease applications for plain and anti- friction bearings. Lithon ep grease has in addition, shear stability, high load carrying capacity and is recommended for situations dictating the use of an extreme pressure multipurpose grease.

LIMIT SWITCHES.jpg

CALCIUM SOAP GREASES

These are calcium complex greases having inherent extreme pressure anti-wear, anti-fretting and lubricity properties designed to cover nearly all greases application requirements. They are suitable for use under both dry and wet conditions and due to high dropping point , they have less tendency to soften with increasing temperatures.

LIMIT SWITCHES.jpg

NON-SOAP GREASES

A clay thickened grease having good oxidation resistance and thermal stability for use in both plain and anti-friction bearings. It can lubricate satisfactorily at temperature up to 230 c and will not melt or soften appreciably even at higher temperature.

LIMIT SWITCHES.jpg

METAL CUTTING FLUIDS

There have been great strides in machine tool design and cutting tool materials due to new industrial materials developed, higher production demands and the ever-smaller tolerances to which components have to be machined. This has led to corresponding advances in cutting fluid technology. Cutting fluids play an important role in speeding up production by enabling increased rates of metal removal to be used, and by reducing or even eliminating problems associated with severe and hazardous machining operations.

LIMIT SWITCHES.jpg

QUENCHING OILS

The term quenching normally refers to the controlled cooling of steel components in a fluid to give specified properties. The hardness and the other physical properties obtained depend up on the composition of the steel, the dimension of the component, the time and temparature of the heat treatment and the speed and duration of the quenching process.

LIMIT SWITCHES.jpg

RUBBER PROCESS OILS

Rubber process oils can be broadly classified into three basic groups depending on the physical arrangement of the carbon atoms namely , parafinics , napthenics and aromatics. All petroleum oils are mixtures of various hydrocarbon groups and their classification is arbitrary and is based on the predominance of a particular hydrocarbon group.

LIMIT SWITCHES.jpg

RUST PREVENTIVES

Rust and corrosion are factors of major economic importance costing industry and consumers abnormal expenses. This unwanted expenditure can be curtailed/eliminated markedly through the use of petroleum-based temporary rust and corrosion preventives.

LIMIT SWITCHES.jpg

HEAT TRANSFER FLUIDS

Hytherm 600 is a premium quality heat transfer oil specially developed for heat transfer system where bulk operating temperatures go upto 305 c. This product is derived from finest quality petroleum base stocks and is fortified with high performance additives to enhance performance at higher temperatures.